top of page
The image shows a PID (Proportional-Integral-Derivative) temperature controller, specifically the PID 912 model from Sense Electric. The display has two main readings: the Process Value (PV) and the Set Value (SV). The PV is shown in red with a reading of 240.0°C, and the SV is shown in green with a reading of 240.0. The controller has buttons for navigation and settings adjustments. This device is used to maintain a desired temperature by adjusting the heating or cooling output based on the difference between the PV and SV.
The image displays a specification sheet for the PID 912 model. It includes details about the device's dimensions (96 x 96 x 40 mm), display size (0.8 inch and 0.56 inch), input types (J Type, K Type, RTD 2W/3W), measuring ranges, output options (relay and SSR), control mode (ON-OFF/PID), accuracy (1.0% of FS), and auxiliary supply (100 to 270V AC). This PID temperature controller is essential for precise temperature control in industrial applications.
The image shows a specification sheet for the TC 911 model, a digital temperature controller. It lists details such as its dimensions (96 x 96 x 40 mm), display size (0.8 inch), and input types (J Type, K Type, RTD 2W/3W). The device provides relay and SSR outputs, operates in ON-OFF/PID control mode, and has an accuracy of 1.0% of FS. This controller is essential for precise temperature control in various industrial applications.
The image shows a digital temperature controller labeled "SENSE ELECTRONIC" with a model number of "TC 511." The display reads "240.0°C," and there are two buttons below the display: one with an upward arrow and one with a downward arrow, likely for adjusting the temperature settings. The display also has an indicator labeled "OUT" with a red light next to it. This temperature controller is used to monitor and control temperature in various applications, making it relevant for industrial or laboratory settings where precise temperature regulation is necessary.

  • Universal Input

  • Flush Mounting 48x48 mm

  • Lower Depth of 65mm

  • Single and Dual LED Display

  • Configurable Output: Relay or SSR Drive

  • °C & °F temperature unit selectable

  • Ramp & Soak profile with Power Failure resumption mode

  • RS 485 Communication

The image shows a digital temperature controller from the brand GIC. The device has a digital display showing the number "27" in red, which likely indicates the current temperature or setpoint. Below the display, there are four green buttons labeled "ESC," "DN," "UP," and "ENT." The side of the device has a diagram with various symbols and labels, which are likely related to the wiring or configuration of the controller. This type of device is commonly used in industrial or laboratory settings to monitor and control temperature.
The image shows a digital temperature controller from the brand GIC. The device has a digital display with two readings: "27" in blue labeled as "PV" (Process Value) and "27.0" in red labeled as "SV" (Set Value). There are four green buttons below the display labeled "ESC," "DN," "UP," and "ENT." The side of the device has a diagram with various connections and labels, but the details of the diagram are not fully visible in the image.

  • IP 65 (For Front Panel)

  • Multiple device programming with SD card support

  • Rapid Set Point change feature

  • Alarm Functionality

  • Single/Dual acting PID controllers with 4 Control modes

  • Auto-tuning PID with provision for Soft-Start

The image shows a digital temperature controller from the brand GIC, model PR-69. The controller's display has two main readings: the Process Value (PV) and the Set Value (SV), both displaying 690.0. The PV is shown in red, while the SV is in green. Below the display, there are four green buttons labeled OP1, OP2, OP3, and a fourth button with a plus sign. Additionally, there are three green indicator lights and one red indicator light. The device is encased in a black casing with a digital display and control buttons, making it ideal for precise temperature control in industrial settings.

  • Universal Input

  • Flush Mounting 96x96 mm

  • 7 Segment Dual Display

  • Configurable Output combination

  • Configurable: Band, Deviation, Sensor break & Loop break alarms

  • Single/Dual acting PID controllers with 4 Control modes

  • Analog Voltage / Current Inputs (0-5 V, 1-5 V, 0-10 V / 4-20 mA) and Outputs (0-10 V / 4-20 mA)

  • Auto-tuning PID with provision for Soft-Start

  • 6 Segment Ramp & Soak profile with Power Failure resumption modes

  • Rapid Set Point change feature

  • RS 485 Communication

  • Bumpless Auto-Manual transfer

  • IP 20 (for Terminals & Enclosure) IP 40 (for Front Panel only)

  • Timer functionality with settable time from 1min to 9999 min

  • CE and RoHS complied

bottom of page