top of page
The image shows an electrical device labeled "SENSE BSP 220S." It appears to be a phase sequence and phase loss relay, which is used in electrical systems to monitor and protect against phase loss and incorrect phase sequence. The front panel of the device has indicators labeled "PWR," "PHASE LOSS," and "PHASE SEQ." The device is primarily black with green accents and has terminal connections at the top and bottom. There is also a side label with additional information and a diagram.
The image depicts a specification sheet for the device model SPP 225. It provides detailed technical information about the device, including its dimensions (90 x 22.5 x 110 mm), mounting type (Channel Mount, Din Rail), input signal range, output (1 Relay, 1 C/O 5A 230V AC for resistive load), accuracy, and auxiliary supply (Self Powered). The device operates at a voltage of 200 to 500V AC (L-L) for a three-phase, three-wire system. It monitors and protects against issues such as phase loss, incorrect phase sequence, and phase asymmetry, ensuring the proper functioning and safety of electrical systems.
The image shows a technical specification sheet for the MRP 932 model. The sheet provides details about the device's dimensions (96 x 96 x 60 mm), display size (0.56 inch), and display type (Seven Segment LED, 3 Digit, 3 Line). It includes information about electrical connections, voltage range, and relay outputs for resistive loads. The MRP 932 offers various tripping facilities such as over/under current, over/under voltage, over/under frequency, and phase loss. It has an accuracy of Class 1.0 and is powered by an auxiliary supply of 100 to 270V AC. This relay is essential for monitoring and protecting electrical systems.
The image shows a digital motor protection relay device labeled "SENSE Electric" with the model number "MSR 338." The device has a digital display showing three voltage readings for L1, L2, and L3, which are 250, 245, and 247 respectively. The display also includes indicators for various parameters such as V-LN, V-L-L, Amp, KA, ASMT, and Hz. There are two output indicators labeled "OUT 1" and "OUT 2." Additionally, there are buttons for navigation and resetting the device, including an arrow button, a button labeled "S/M," and a "RESET" button. The text "TRUE RMS" is displayed at the top right corner, and "MOTOR PROTECTION RELAY" is written at the bottom.
The image shows an electronic device, specifically a 3D voltage relay, manufactured by SENSE Electric with the model number VR 932. The front panel features a large red digital display indicating the number "230," and includes the text "TRUE RMS" in the top right corner. On the left side, there are indicators for "L1," "L2," "L3," and "Hz," while the right side has indicators for "R1" and "R2." Below the digital display, a symbol for alternating current (AC) and the letter "V" are present. The device also has two buttons labeled "SCROLL" and "RESET" at the bottom right, and is marked with "SENSE Electric" and "3D VOLTAGE RELAY" at the bottom. This device is used for monitoring and controlling voltage levels in electrical systems, providing precise voltage regulation and protection in various applications.
The image shows a specification sheet for the VR 932 model. It provides technical details such as dimensions (96 x 96 x 40 mm), display type (Seven Segment LED, 3 Digit), and electrical connections (three-phase three-wire and three-phase four-wire systems). The input voltage ranges from 30 to 300V (L-N) and 50 to 520V AC (L-L). The device includes one relay output with an optional second relay and various tripping parameters like over voltage and phase loss. The auxiliary supply is 230V AC ±10%, 50Hz. This sheet helps understand the VR 932's capabilities and requirements for electrical systems.
The image shows a specification sheet for the CR 931 model. It provides technical details such as dimensions (96 x 96 x 40 mm) and panel cutout (92 x 92 mm). The display is a seven-segment LED with four digits, measuring 0.8 inches. The rated input includes CT secondary 5A (50mA to 5A) and CT primary 5A to 6000A (field selectable). The device has one relay output (NO-C-NC) with a capacity of 5A at 230V AC for a resistive load, with an optional second relay output. Tripping parameters cover over current, under current, phase loss, and current asymmetry. The auxiliary supply is 230V AC ±10%, 50Hz. This sheet helps understand the CR 931's capabilities and requirements for electrical systems.
The image shows an electronic device, specifically a current relay, with the brand name "SENSE Electric" and the model number "CR 931." The device has a digital display showing the value "5.000" in red digits, with the unit "A" (Amperes) below it, indicating it is measuring current. The display also includes indicators for "L1," "L2," "L3," and "R1." There are buttons labeled "SCROLL" and "RESET" on the front panel. The text "TRUE RMS" is displayed in the top right corner, and "30 CURRENT RELAY" is written at the bottom.
The image depicts a current controller model CC 912 by Sense Electric. The device features a digital display that shows the current measurement of "54.00" amperes, as well as a set value also labeled as "54.00." The display includes indicators such as "TRUE RMS" and "OUT." At the bottom, the device has three buttons with a gear icon, an up arrow, and a down arrow for navigation and settings adjustment. The brand name "SENSE Electric" and the model number "CC 912" are displayed prominently, making it clear that this is a current controller used for precise current measurement and control in electrical systems.
The image shows a specification sheet for the CR 912 model, an electronic device used for current monitoring and protection. Key details from the sheet include its dimensions (96 x 96 x 40 mm), panel cutout size (92 x 92 mm), and display size (upper display 0.8 inch and lower display 0.56 inch). The display is a four-digit seven-segment LED. The rated input is CT secondary 5A (50mA to 5A) and CT primary 5A to 2000A (field selectable). The device includes one relay output (NO-C-NC) with a capacity of 5A at 230V AC for a resistive load. Tripping parameters include high and low alarms. The auxiliary supply is 100 – 270V AC, 50/60Hz. This device is essential for ensuring accurate current monitoring and protection in electrical systems.

  • Compact 14 mm slim design  Variety of Operating voltages (12 VAC/DC, 24 VAC/DC, 120 VAC/DC, 230 VAC/DC)

  • Output Relay: 2 C/O for high switching current up to 8A at 230VAC

  •  All sockets with LED for relay status

  • Shorting Link, Marker & end clamp available as accessories

  •  CE and RoHS complied

The image shows a black electrical component, specifically a three-pole circuit breaker. The circuit breaker has three switches, each with a green indicator light. The component has multiple connection points at the bottom and is designed for mounting on a DIN rail. This type of circuit breaker is used to protect electrical circuits from damage caused by overload or short circuit.
The image shows an electrical relay module with multiple relay channels. It features four white rectangular components, each with a green indicator light on top. The module has numerous connection points for wiring, visible on the top and bottom edges. The side of the module displays various technical specifications and certification marks, including CE and UL markings, indicating compliance with European and North American safety standards. This type of relay module is commonly used in industrial automation and control systems to switch electrical circuits on and off.

  • Reduces wiring work by 60% when combined with the P2RF-[]-PU Push-In Plus Socket

  • (according to actual OMRON measurements).

  • Lockable test button models available.

  •  Built-in mechanical operation indicator.

  •  Provided with nameplate.

  •  AC type is equipped with a coil-disconnection self-diagnostic function (LED type).

  •  High switching power (1-pole: 10 A).

• Compact 6.2 mm slim design

• Variety of Operating voltages (24 VDC, 24 VAC/DC, 120 VAC/DC, 230 VAC, 230 VAC/DC)

• Output Relay: 1 C/O for high switching current up to 6A at 250VAC

• All sockets with LED for relay status

• Shorting Link, Marker & end clamp available as accessories

• CE and RoHS complied

The image shows an electromechanical relay. This relay consists of a transparent plastic cover that houses the internal components, including the coil, armature, and contacts. The relay is mounted on a black base with multiple connection terminals for wiring. The orange component at the bottom is likely a manual override or test button. Relays are used to control high-power circuits with a low-power signal, making them essential in various electrical and electronic applications.
bottom of page